中文版 
ENGLISH 
PRODUCTS
Jiangsu kanazawa heavy machinery co., LTD.,
Service hotline:+86-13901477088
Tel:+86-513-88661999
Fax:+86-513-88661199
Phone:+86-13901477088
E-mail:info@jsjzzj.com
YJZ087 Series automoblie chassis forming hydraulic perss
PERFORMANCE FEATURES:
★ This machine is suitable for auto longeron stretching process, also can be engaged in other metal sheet forming and calibration process;
★ The machine has independent power mechanism and electrical system, PLC control technology, the closed loop synchronous control
system centralized control buttons, which can realize point move, three operation modes of manual, semiautomatic, and according to customer's technological requirements of different length of products take different program control, reducing power consumption;
★ The machine working pressure, pressing speed, the traveling schedule scope may be adjusted according to the technological
requirements;
★ This machine adopts the structure form, more than three beam column three beams to carry on the aging treatment, welding machine has enough stiffness and strength, operating space is capacious. To facilitate observation and mould to install all around, the machine has simple structure and good appearance. Hydraulic system adopt integrated instrumentation system in combination with proportional control valve which can realize large flow and high synchronization precision large partial load capacity requirements, and the structure is simple, compact, reliable, easy to fault diagnosis and elimination;
★ The power system of the machine is on the top to reduce floor area.Safety barrier is equipped around the up beam.Ladder is also equipped for convinient installation and repair;
★ Can use the common control system or servo control system.
|
參數(shù)名稱 parameter
|
單位 Unit
|
YJZ087-5000
|
YJZ087-3000
|
YJZ087-2000
|
|
|
公稱力 Rated pressure
|
KN
|
50000
|
20000+10000
|
20000
|
|
|
回程力 Return force
|
KN
|
3400
|
4000+2000
|
2000
|
|
|
頂出力 Ejection force
|
KN
|
1000X8
|
630X4+630X2
|
2500(可調(diào))+630X4
|
|
|
頂出缸退回力 Ejection cylinder return force
|
KN
|
315X8
|
350X4+350X2
|
1400(可調(diào))+350X4
|
|
|
液體最大工作壓力 Liquid maximum working pressure
|
MPA
|
25
|
25
|
25
|
|
|
滑塊距工作臺面最大距離 The slider is apart from the work surface maximum distance
|
MM
|
1300
|
1300
|
1300
|
|
|
滑塊最大行程 The slider range
|
MM
|
900
|
800
|
900
|
|
|
頂出缸最大行程 Ejection cylinder range
|
MM
|
250
|
150
|
150
|
|
|
滑塊速度 slide speed
|
工作 Pressing
|
MM/S
|
120
|
120
|
120
|
|
回程 Return
|
MM/S
|
2月5日
|
2月5日
|
2月5日
|
|
|
左右 L-R
|
MM
|
60
|
35
|
50
|
|
|
電機功率 Motor power
|
KW
|
187.5
|
135
|
97.5
|
|
|
工作臺有效面積 Effective area of the workbench
|
左右 L-R
|
MM
|
12000
|
6000+3000
|
6000
|
|
前后 F-B
|
MM
|
1000
|
1000+1200
|
1000
|
|
|
整機外型尺寸 The machine appearance size
|
左右 L-R
|
MM
|
12000
|
9000
|
6000
|
|
前后F-B
|
MM
|
2400
|
2800
|
2400
|
|
|
地面以上高度 Height above the ground
|
MM
|
6800
|
6050
|
6050
|
|
|
地面以下深度 Height above the ground
|
MM
|
700
|
750
|
750
|
|
|
工作臺距地面高度 Height above the ground
|
MM
|
500
|
250
|
250
|
|
Description and specification given in this catalogue are subiect to mmodification without notice.